DiscussWorldIssues - Socio-Economic Religion and Political Uncensored Debate - View Single Post - Restoring old car batteries with magic additive

**gariharrr** · 08-26-2012, 06:42 PM

Maybe?
The usual method is using a suitable charger designed for the purpose.

There are two types of sulfation: reversible (or soft sulfation), and permanent (or hard sulfation). If a battery is serviced early, reversible sulfation can often be corrected by applying an overcharge to a fully charged battery in the form of a regulated current of about 200mA. The battery terminal voltage is allowed to rise to between 2.50 and 2.66V/cell (15 and 16V on a 12V mono block) for about 24 hours. Increasing the battery temperature to 50–60°C (122–140°F) further helps in dissolving the crystals. Permanent sulfation sets in when the battery has been in a low state-of-charge for weeks or months. At this stage, no form of restoration is possible.
So the additive may help with hard sulphation.

Battery Uni.

08-26-2012, 06:42 PM	#2
gariharrr Join Date Oct 2005 Posts 775 Senior Member	Maybe? The usual method is using a suitable charger designed for the purpose. There are two types of sulfation: reversible (or soft sulfation), and permanent (or hard sulfation). If a battery is serviced early, reversible sulfation can often be corrected by applying an overcharge to a fully charged battery in the form of a regulated current of about 200mA. The battery terminal voltage is allowed to rise to between 2.50 and 2.66V/cell (15 and 16V on a 12V mono block) for about 24 hours. Increasing the battery temperature to 50–60°C (122–140°F) further helps in dissolving the crystals. Permanent sulfation sets in when the battery has been in a low state-of-charge for weeks or months. At this stage, no form of restoration is possible. So the additive may help with hard sulphation. Battery Uni.
	Quote