View Single Post
Old 05-11-2009, 12:31 PM   #8
8Uxtkz7F

Join Date
Oct 2005
Posts
548
Senior Member
Default
Sweet.

1.) How far is the stroking going to take the motor?

2.) Have a goal for X amount of PSI?



Now, concern. Don't know much about these new motors, but I have heard that they are rubbish basically. They are coarse, and have bad vibrations in the higher RPMs.

Quote from InsideLine


That is pretty much everything that I have been reading on reviews.
This going to pose a problem with it being turbocharged and stroked out?
You getting all new engine interals?
I would expect the engine work to improve the NVH, if anything, as the engine will be internally balanced and also the head flow/compressions to a higher standard than stock.

LM, it's going to be one hell of a beast, to say the least, so I would seriously recommend a full roll cage, strong race seat and a minimum of a four point, 3" harness as any 'mishap' is likely to happen with considerable speed and violence.
Plumbed in fire extinquisher and fuel cell would also be recommended.
It also means it'll be good for track days and the occasional play race.

Be nice to us, and keep us informed on the build - with lots of nice pictures!
8Uxtkz7F is offline


 

All times are GMT +1. The time now is 01:02 PM.
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Design & Developed by Amodity.com
Copyright© Amodity