DiscussWorldIssues - Socio-Economic Religion and Political Uncensored Debate - View Single Post - Help - un-alarm my car

**justashonglefan** · 04-18-2010, 07:29 AM

So if I remove the splice it will work ignite?

I can see where it originates but know NOTHING about the systems, I would have though you break the original system and re-route it through the emob.

Thanks

thats right follow it through the bulkhead to the relay/fuse box or where ever it goes find the wires then bridge the original connections that the emob was grafted into and that should do the trick I think your alarm is quite a basic one mate

the alarm probably has its own relay (control box) that is constantly open circuit until you plug the fob in then it energizes the system so if you can find that you may be able to force it closed it could also run from your ignition switch so look at that too.

04-18-2010, 07:29 AM	#6
justashonglefan Join Date Oct 2005 Posts 382 Senior Member	So if I remove the splice it will work ignite? I can see where it originates but know NOTHING about the systems, I would have though you break the original system and re-route it through the emob. Thanks thats right follow it through the bulkhead to the relay/fuse box or where ever it goes find the wires then bridge the original connections that the emob was grafted into and that should do the trick I think your alarm is quite a basic one mate the alarm probably has its own relay (control box) that is constantly open circuit until you plug the fob in then it energizes the system so if you can find that you may be able to force it closed it could also run from your ignition switch so look at that too.
	Quote