General Discussion Undecided where to post - do it here. |
Reply to Thread New Thread |
![]() |
#1 |
|
so tried of people thinking that spending lots of $ on PC stuff = mad PC skills!
I see this all the time... guys that spend tons of money on a rig and then all they do is bump the FSB and all of the sudden they think they have 'skills' in the PC world... they dont even know what p95 is let alone if their CPU is stable... they just read a couple tom's hardware reviews and all of the sudden they are a big dog... this new breed of PC 'overclockers' and 'modders' seem to 'have everything figured out'... they are disrespectful and nearly violent if you dare to question their 'knowledge' they will ignore basic logic and even commonly excepted scientific facts and replace it with their own twisted version of reality... I even witnessed one such 'overclocker' inform me that using a car's heater core was not only 'ghetto' but that it would kill my CPU... never mind that my rig had the same CPU as his and was running 600mhz higher than his but some how my POS white trash water cooling setup was able to have load temps that where around 18c lower than his... its like there is no respect for the little guy that OC's the hell outta that old q6600 to 4.2GHz (which, some say, would keep up with a stock i7 920) build there own water cooling setup, volt mod there cards and push the living crap outta there system till it finally goes out in a blaze of glory! what ever happened to the true over clocker? the guy that couldnt afford that new pentium so instead he over clocked the crap outta a celeron 300a and made the pentium look like crap... or the guy that OC'ed an old 1700+ and made its intel counter parts cry? what happened? |
![]() |
![]() |
#2 |
|
|
![]() |
![]() |
#3 |
|
If you have never cut a blow hole in a beige pc case you have no mad skills [yes] I'm tired of people who think they know about PCs because they can enter the bios, and change a few things, and then run a benchmark. And their suggestion for fixing PC problems is always "you need more RAM". Huge case with tons of fans + off the shelf water cooling + i7 + SLI knowledge. It just means you can spend money. |
![]() |
![]() |
#4 |
|
I get a thrill reading a tech support forum for a pc game and because a game wont do some minor thing correctly. IE occasional bsod or sound issues. These genius's will have the poor sap testing his graphics card in another rig buying an 8,000 watt psu and adding another 8 gigs of ram or even tell him his cpu is fried , most times its just a sound driver or graphics driver or software conflict somewhere.[rofl]
|
![]() |
![]() |
#5 |
|
super glue and thermal paste to get ram heatsink's on from cut up cpu heatsinks
soldier or those metal pen modding old athalons to unlock mulitpliers soldier modding old x800 pro into a x800 xt getting glass and sand paper and lapping a smooth heatsink omg soo much cutting of pc cases lol so many broken things and yet so much enjoyment it was the older experimenting, hoping it would work, breaking ****, but then once u got it to work and it was such a glory |
![]() |
![]() |
#7 |
|
|
![]() |
![]() |
#10 |
|
|
![]() |
![]() |
#11 |
|
Truth. |
![]() |
![]() |
#12 |
|
I get a thrill reading a tech support forum for a pc game and because a game wont do some minor thing correctly. IE occasional bsod or sound issues. These genius's will have the poor sap testing his graphics card in another rig buying an 8,000 watt psu and adding another 8 gigs of ram or even tell him his cpu is fried , most times its just a sound driver or graphics driver or software conflict somewhere.[rofl] |
![]() |
![]() |
#13 |
|
super glue and thermal paste to get ram heatsink's on from cut up cpu heatsinks i rember that... nope i volt modded the 9700 pro i did the water block and the CPU I love cutting cases [thumbup] |
![]() |
![]() |
#15 |
|
|
![]() |
![]() |
#16 |
|
They bought laptops. Most "hardcore" thing I've done is use a rear window defogger kit to unlock the multiplier on an 1800+ Palomino. Oh and i miss my kingston value ram PC2700 that i had overclocked to 200Mhz @ 2-2-2-5 timings. |
![]() |
![]() |
#18 |
|
|
![]() |
Reply to Thread New Thread |
Currently Active Users Viewing This Thread: 9 (0 members and 9 guests) | |
|