[iioijjjkkojhbb]

ok, i hope this will pass the mods....this forum sure is the best place for this discussion...

now im getting ready to start my journey into "free energy" to try and live "off the grid" once and for all. i want to be ready for a complete long term grid shutdown.....its also in the spirit of getting ready in the next few years to be completly indipendent.

i have started to research different techniques to provide free energy. i am planning this summer to build a small prototype "magnet motor" that you can find on the net. that is definetly doable and i will build it.
the thing is im not sure that could provide strong current, or maybe it can but i would need to build a big one with stronger magnets.

so i came across some info on tesla's radient energy system...us patent no. 685,957! and us patent no 685,958...do a search on that!
now i live in quebec and tesla tested this here in the 30's and im completly facinated with this!

the reason im writing here is in hoping people can chip in on what they know/have tried, so that we could as a comunity make this work!

like i said, i hope this passes the mods, i guess it can be judged a bit controversial, but i feel that this is the ticket to free energy in masses.
it seems to work, as tesla tried it in the 30's.
basically, the way i see it, we could manufacture this and have a whole community tap in to it via the ground "wireless" and establish a small scale wireless grid!
i am convinced that we need to do this, im also convinced that power grid shutdowns are in the near futur and we should be ready with a parallel system.
please google "radiant energy system tesla us patent no. 685,957" and us patent no 685,958.
some of you might be aware of these, im just thinking the more of us are aware of this, the easier it might be built. i do not have a suitable workshop for this yet, but im hoping it might inspire some diy'ers that have the time and workshop to try this.

[iioijjjkkojhbb]

i posted this without doing much research, but i found some good info on youtube. some people are doing simple tests that get the results!...
these results do prove the concept to work, now its just a matter of getting it to be practical and produce usable power and current.
basically here is the concept.

set up metal plates(the bigger the plates, the faster the charge), these plates can be inside a house or outside. isolate the metal plates with a plastic shield, something to do with not loosing the charge. ionic particles that are naturally in the air(from the sun), carry both negative and positive charges.....this charge needs a potential difference to induce movement(current).
so you put a wire from the plates to a rod in the ground...the 'ground' part of the equation using normal electricity.
now you gotta figure a way of keeping this current....in comes the capacitor which you put between the plates and the metal rod going in the ground.
now i mentioned that we need a way to figure how to get usable amounts.....so far from what i have seen, you can charge the capacitors with a few volts a day on average. now that is pretty good considering you are getting this electricity from "thin air"!!

im thinking different capacitor sizes in a cascading form, all simultaniously feeding a transformer......this transformer could step up the voltage to a usable level.
the biggest challenge would be to have a constant and usable current. again, maybe something to do with capacitors.

anyway, this is a start, im hoping "electrical minds" can join in the discussion. to me, it seems that the hardest part is done...which is to actually get some voltage from the air. working suitable current has been done for ages now, its just a matter of adapting what we already know to this particular system!

im just discovering this now, im confident that we can get this to work as a suitable option to relying on the "grid" for power.

oh, im thinking, when i do build a new dwelling somewhere on a mountain in nature with my friends in the coming years, which will form a community.....the house roof could be made of aluminium sheets which in turn would also be used to capture the ionic particles used for this circuit!
oh boy, my head is spinning right about now, so much to learn in so little time.:d

[wiweimeli]

don't get too fretted about finding free electric power sources. i've been there and been relatively successful with [please e-mail for product name]. then i got to thinking, look at the world around us, it's so false and hectic and unatural.

this all goes back well before the industrial revolution, to the time of the gregorian calendar. prior to that we lived by the movement of the sun and the moon, and that was perfectly natural. consider the groundhog, it comes out of hibernation on the 2nd of february, hence groundhog day. how does it do it ? i'm sure they don't have diaries or electric alarm clocks !

i was born on 2nd feb 1959................and i'm going back to the old ways.